2637 - ECP3: Can on-chip parallel termination to <!--[if gte mso 9]><xml> <o:OfficeDocumentSettings> <o:AllowPNG/> </o:OfficeDocumentSettings> </xml><![endif]-->V_TTbe used when implementing Generic DDR interface on LatticeECP3 device?

• Related Articles

• 7096 - DDR: Can the "DDR_Generic" Module in Lattice Radiant and Diamond software which has DDR communication supports bidirectional input and output?

  The Generic Double Data Rate Input/Output (GDDR I/O) Module has separate receive DDR interface and transmit DDR interface, it doesn't support the use of GDDRx1 pin as input and the same pin as output. The 'Interface Type' option in IP Catalog for DDR ...

• 2519 - LatticeECP3 : Why does LatticeECP3 Generic DDR (Double Data Rate) design generates missing attribute errors?

  IDDRAPPS and ODDRAPPS attributes are required for all DDR interfaces to indicate the type of interface being generated by the software. When the DDR interface is generated through IPexpress it will generate HDL that includes the correct values for ...

• 2530 - Generic DDR Simulation: glitches in functional simulation, but not in timing simulations for an output DDR (Double Data Rate) interface

  Description: In the GDDRX2_TX Aligned interface, the ECLKSYNC, CLKDIV, DQSBUFE1 and SCLK routing delay timing will generate the required phase relationship between SCLK and DQCLK1 inside the ODDRX2D module so data will be correctly transferred ...

• 387 - What should I do with the LatticeECP3 DDR3 memory interface VTT termination?

  Only external VTT termination should be used for LatticeECP3 DDR3. Use of LatticeECP3's internal on-die termination (ODT) is not recommended. According to the eye diagrams and simulation results from the Lattice factory tests, the recommended ...

• 6200 - ECP5/ECP5-5G / PLL - Can ECP5 device supports Spread Spectrum Clock (SSC) generation using generic PLL?

  Description: This article clarifies on SSC generation using PLL in ECP5. Solution: ECP5 device does not support Spread Spectrum Clock (SSC) generation using generic PLL. This feature is, however, applicable only by using SerDes PLL.