2521 - Power ManagerII: Where can I find the process technology information for the Power Manager II products?

• Related Articles

• 1397 - Power Manager II: How to implement a digitally controlled power supply?

  The POWR1220AT8 can be used to implement a form of Voltage Identification Digital (VID). Typically a processor will output a digital code to the power supply to request more or less power depending on the processor load. When the processor is going ...

• 433 - How can I sense current with a Power Manager II?

  The Power Manager II devices can not measure current directly. However, the Application Note AN6049 shows several circuits that can be used with a Power Manager II device to measure current. The circuits shown convert the current into a voltage that ...

• 2721 - Can Power Manager II Device  support Hot Socketing?

  Yes, Power Manager II device supports Hot Socketing. All the pins of the Power Manager II are Hot Socket complaint. There is no problem in applying maximum specified I/O voltages to the pins before VCCD or VCCA is applied. However small leakage ...

• 413 - How do I implement Power-Off Detection in a Power Manager II device ?

  The Power Off Detection is used to sense when a supply (or set of supplies) is fully discharged before re-cycling the power-on or re-start sequence. Many devices require the supplies to be fully off before applying power and a Power Off Detection ...

• 1495 - Power Manager II: Is there an "Boundary Scan Descriptive Language"&nbsp; (BSDL) file available?&nbsp;<br> &nbsp;

  Yes, the Lattice website has a page dedicated to Power Manager Devices , Power Manager II"Boundary Scan Descriptive Language", BSDL files are available under "DOWNLOADS" section of the page.