2393 - [LatticeECP3]: Can Lattice's reference design "HDMI/DVI Interface" support audio function?

• Related Articles

• 2988 - [LatticeECP3]: Can Lattice High Definition Multimedia Interface/ Digital Visual Interface (HDMI/DVI) reference designs-RD1097 support more resolutions?

  Yes. Some settings of Serializer-Deserializer (SerDes) are adjusted through Serial Communication Interface (SCI) to support more resolutions low up to 800x600@60Hz. "10B only" mode is used in SERDES for our High Definition Multimedia Interface/ ...

• 2392 - [LatticeECP3]: Can Lattice's reference design "HDMI/DVI Interface" support all resolutions defined in HDMI/DVI specification?

  No. The current reference design, RD1097, supports only the resolutions between 1024x768@60Hz(65MHz pixel frequency) to 1600x1200@60Hz(162MHz pixel frequency). You can get detailed information from Table 6 and Table 7, RD1097.

• 3021 - [LatticeECP3]: How does the word alignment signal work in HDMI (High-Definition Multimedia Interface) in HDMI/DVI Interface Reference Design (RD1097)?

  The word alignment function in PCS is use to catch the 4 dedicated commas. The HDMI data codec format is not the real G8B10B, one internal word alignment module was used to make the function more robust. With the improvement of the internal word ...

• 3676 - ICE40: Is the HiSPi to Parallel Sensor Bridge Reference Design supported on iCE40?

  Description: iCE40 family of devices do not support HiSPI to Parallel Sensor Bridge Reference Design. Instead the Lattice MachXO2 family can be considered for this functionality. Link to Single HiSPi sensor bridge design using XO2: ...

• 3802 - MIPI DSI Receive Bridge:  Which video transmission modes are supported by Lattice DSI-RX Reference Design - RD1185?

  The DSI-RX Reference Design (RD1185) supports all video transmission modes defined in the MIPI DSI Specification v1.1: - Non-Burst Mode with Sync Pulses - Non-Burst Mode with Sync Events - Burst mode The DSI-TX Reference Design (RD1184) supports two ...