2310 - PAC-Designer:  Why does my POWR1014A design fail to compile but not give an error message?

If your Power Manager II design fails to compile and gives no error message it could be due to the use of periods or spaces in the project file name or the path name. Usually the failure message is produced immediately after starting the compile process for these errors.

Sometimes you may also see the following messages in the error window:

AHDL2BLF; ABEL-HDL Processor
PAC-Designer 6.30 Copyright(C), 1992-2005, Lattice Semiconductor Corporation. All rights reserved
Portions Copyright(c), 1992-1999, Vantis Corporation
Portions Copyright(C), 1993-1998, Data I/O Corporation
Portions Copyright(C), 1997-1998, MINC Washington Corporation
Portions Copyright(C), Alan Phillips, Lancaster University Computer Centre 1992-1998
Warning 1211: Generate NAF file failed, please compile design to get detailed error information.

Strange results can be caused by using periods or spaces in the project file name or the path name. I recommend that you do not use any periods or spaces in the file name or path name to the file. You can include underscores in the file/path name if you want to.

Related Articles
2363 - PAC-Designer:  Why does user design fail to compile with a Warning 1211: Generate NAF file failed?<br>
If the user Power Manager II design fails to compile and gives a Warning 1211 in the error message window it may be caused by using spaces or periods in the project file name or path name. AHDL2BLF; ABEL-HDL Processor PAC-Designer 6.30 Copyright(C), ...
651 - PAC-Designer: Why does my LogiBuilder design fail to compile?  <strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.
PAC-Designer: PAC-Designer will issue this error message if an output is set to be controlled by I2C and that same output is used in a Boolean equation. The fitter drops the output macrocell from the resource list as I2C is controlling the pin. ...
1930 - PAC Designer: What causes a design to fail to compile with the error f38009 or invalid p38031?
There are two issues which may cause these errors with a design. The first is that in order to use an Output on the right hand side of a supervisory equation it must also be assigned a value somewhere in the design. It could be assigned in a step of ...
1853 - PAC Designer: What does the error message “The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem” mean when launching PAC Designer?
This error message typically occurs when a user does not have Microsoft's .NET framework set up correctly for their machine. The necessary components are also provided with PAC-Designer, and can be manually installed by running the file ...
2228 - PAC Designer: How to change the timer value when using an ABEL design?
When using an ABEL design for the Power Manager II devices, the XLAT_STIMER macro and the XLAT_PRESCALER macro are both only used for simulation. Changing these parameters will NOT affect the setting of the timers in the Power Manager II device ...

2310 - PAC-Designer:&nbsp; Why does my POWR1014A design fail to compile but not give an error message?

2310 - PAC-Designer:&nbsp; Why does my POWR1014A design fail to compile but not give an error message?

Related Articles

2363 - PAC-Designer:&nbsp; Why does user design fail to compile with a Warning 1211: Generate NAF file failed?<br>

651 - PAC-Designer: Why does my LogiBuilder design fail to compile?&nbsp;&nbsp;<strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.

1930 - PAC Designer: What causes a design to fail to compile with the error f38009 or invalid p38031?

1853 - PAC Designer: What does the error message “The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem” mean when launching PAC Designer?

2228 - PAC Designer: How to change the timer value when using an ABEL design?

2310 - PAC-Designer: Why does my POWR1014A design fail to compile but not give an error message?

2310 - PAC-Designer: Why does my POWR1014A design fail to compile but not give an error message?

2363 - PAC-Designer: Why does user design fail to compile with a Warning 1211: Generate NAF file failed?<br>

651 - PAC-Designer: Why does my LogiBuilder design fail to compile? <strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.