2185 - [MachXO] For the MachXO's Idk (hot socketing leakage spec), what factors control whether the Idk is sourced or sink?

• Related Articles

• 440 - Why is hotsocketing leakage current (IDK) listed separately from other IO leakage currents in Lattice data sheets?

  Semiconductor devices exhibit leakage current at various conditions. For Lattice devices, we specify input/pullup/bus hold leakage current as part of the normal operational conditions. The hotsocketing leakage current (IDK) is the leakage current ...

• 6016 - MachXO2/XO3/XO3D: Do we have hot socketing specification in LVDS I/O standard?

  There’s no difference between single-ended and differential I/O. The hot socketing specification remains the same.

• 2721 - Can Power Manager II Device  support Hot Socketing?

  Yes, Power Manager II device supports Hot Socketing. All the pins of the Power Manager II are Hot Socket complaint. There is no problem in applying maximum specified I/O voltages to the pins before VCCD or VCCA is applied. However small leakage ...

• 6398 - CertusPro-NX: Does High Performance IO supports hot socketing?

  The Certus-Pro NX HP IOs does not support hot socketing.

• 1862 - Power Manager 2: For the open drain outputs, how much leakage current is expected?

  For digital outputs 3-14 of the POWR1014/A device the leakage current during the high state will be very low, typically 30 uA or less. During the low state, digital outputs 3-14 can sink up to 1 mA of current and will stay within the specifications ...