2175 - PAC-Designer / Power Manager II: POWR1014A is configured to use VMONx in window mode, but the logibuilder code does not simulate the over/under trip points correctly with the window mode enabled. How does the simulator handle the window logic?

• Related Articles

• 831 - PAC-Designer: How do I convert my Logi-Builder design code to ABEL?

  PAC-Designer: There are times when the user wants to convert the design to ABEL language to describe the sequence for a Power Manager. Start a simple sequence and add your timers and output states in LogiBuilder. Save the design Compile the design ...

• 2865 - PAC Designer: How to implement a latched output for the Power Manager Device?

  In the PAC-Designer Software, users can use D Flip-Flop to implement a clocked latch. In the Logibuilder section of the PAC-Designer software, declare a registered D Flip-flop output using Supervisory Equations. The registered output can be assigned ...

• 2574 - PAC Designer: Is it possible to manually assign TRIM DAC output voltages to Power Manager II Devices, rather than using the trim configuration calculator?

  Solution:It is possible to assign manual DAC codes to the different profiles of the Power Manager II TRIM DAC outputs. The menu interface for manual assignment can be found in the Edit->Symbol menu in the top level schematic view of PAC-Designer. The ...

• 1734 - PAC Designer / Power Manager II: How to implement a reset in the code?

  Solution: The reset function can be assigned to an IN Input pin and an equation can be written in the Exceptions or in the Supervisory Logic section. Reset can be accompanied with a Timer and simple or complex equations can be used to activate it. ...

• 5464 - Power Manager II: What tools should I use to design code for the CPLD within the POWR1220AT8, and is there any documentation recommended?

  Description: The programming file (.jed) for CPLD within the POWR1220AT8 can only be generated using the PAC-Designer tool. Here is the direct link: http://www.latticesemi.com/en/Products/DesignSoftwareAndIP/MixedSignalDS/PacDesigner Solution: Inside ...