1915 - Diamond: ERROR - par: Failed to dump design to file.

• Related Articles

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 1456 - Power Calculator: How can the user load a Value Change Dump (VCD) file into Power Calculator?

  A Value Change Dump (VCD) file is an ASCII file that describes the state transitions of digital logic. A VCD file can be written by logic simulation tools. Power estimation performed using a VCD file is an improvement over guessing an operating ...

• 2363 - PAC-Designer:&nbsp; Why does user design fail to compile with a Warning 1211: Generate NAF file failed?<br>

  If the user Power Manager II design fails to compile and gives a Warning 1211 in the error message window it may be caused by using spaces or periods in the project file name or path name. AHDL2BLF; ABEL-HDL Processor PAC-Designer 6.30 Copyright(C), ...

• 7492 - Programmer: ERROR - Failed to write algorithm file

  Description: When trying to program a Lattice FPGA device using Radiant Programmer, below error might occur if user account permission is not properly configured on the machine: ERROR - Failed to write algorithm file Solution: A. For Windows 1. Make ...

• 1805 - Diamond: Can user make post Place and Route (PAR) changes to the design without having to run through the entire Lattice Diamond design flow?

  Changes to the post PAR design are generally refereed to as Engineering Change Orders, or ECOs. The changes are directly written into the Native Circuit Description (.ncd) database file without requiring that user go through the entire design ...