1895 - PAC Designer: How to change the I2C Address of the ISPPAC1014A device using the I2C Utility within PAC-Designer?

• Related Articles

• 2228 - PAC Designer: How to change the timer value when using an ABEL design?

  When using an ABEL design for the Power Manager II devices, the XLAT_STIMER macro and the XLAT_PRESCALER macro are both only used for simulation. Changing these parameters will NOT affect the setting of the timers in the Power Manager II device ...

• 1850 - PAC Designer: Does the PAC-Designer I2C utility work with the Lattice USB Download cable?

  The PAC-Designer I2C utility for the POWR1220AT8 device will work with the Lattice USB Download cable when using the WindowsXP operating system. It will not work with Windows7 operating system at this time. This utility was created so that a user ...

• 688 - PAC-Designer: How to view the internal DAC settings within the ispPAC-POWR1220AT8?

  PAC-Designer: Using PAC Designer: In the main schematic window, select the 'Edit' function on the top toolbar. Under this feature choose 'Edit Symbol'. The menu will display the features that are viewable or can be edited. This would be similar to ...

• 275 - PAC-Designer: How do I change the Timers on a ProcessorPM-PM605?

  Solution: The device is programmable and may change it if needed using PAC-Designer. By default, the shipped configuration is programmed to implement a Power Supply Supervisor, Reset Generator and Watchdog Timer. The timer functions for the watchdog ...

• 1445 - PAC-Designer: Is there a I2C hardware verification utility available in the tool?

  Solution: Yes, there is. I2C hardware verification utilities are available and can be accessed via Tools ->Design Utilities in the PAC Designer. A parallel port programming/download cable can be used to test the features available with most Lattice ...