1812 - Diamond: How does Lattice Diamond know which&nbsp;IP cores&nbsp;were installed?<br>

• Related Articles

• Lattice Diamond: How will I show IPs installed from Lattice IP Server in Clarity designer in Diamond Software?

  If this would be related to the IP not appearing in the local catalog, you might try to use this approach: (1) from C:\LatticeCore which is the IP repositories (if this is default), locate the IP that you have, copy the folder name (2) from ...

• 732 - Lattice Diamond: What is&nbsp;the purpose of the&nbsp;.lpc file generated by IPExpress ?

  Lattice Diamond: The .lpc (Lattice Parameter Configuration) file is a text file that contains values entered for IPexpress modules and IP cores. It has two main functions: It is used by IPexpress to store the user-selected values of settings for ...

• Lattice Diamond/DCSC Primtive IP: 2019990 ERROR - Port SEL does not exist.&nbsp;

  Description: When user used the DCSC Verilog instantiation code from TN02200 and run the design flow compilation, user may observed error in Synthesis run as below. 2019990 ERROR - Port SEL does not exist Solution: To workaround this error message, ...

• 1032 - Lattice Diamond: Lattice ispLEVER:&nbsp;Can I open EPIC on a design that uses an IPCore that was downloaded from Lattice's website? <br>

  Lattice Diamond: Lattice ispLEVER: The LatticeCore IPs downloaded from Lattice's website or using the IPExpress are available as a trial. These IPs will place and route in Diamond or ispLEVER, however, these are for evaluation purposes only. Using a ...

• Diamond: Is there an IP Packager counterpart?

  Description: There is no IP Packager counterpart in Diamond. The only available workaround is creating an NGO/Black Box file. Here is the FAQ and guide in Lattice Diamond Help on how to implement this.