1751 - Schematic Design Entry: How do I add I/O type to a port?

To add an I/O type to a port in the design schematic, users need to first draw (or extend) a wire from the symbol port of their choice. Next, name this wire using the Net Name button.

Click the IO Port button and select the type of port (input, output, inout) from the drop-down menu and click on the named wire. This will set the wire with an IO port symbol with the name selected.

Related Articles
3979 - Does iCEcube2 support schematic design entry?
iCEcube2 does not support schematic design entry. It only supports Verilog, VHDL, and mixed-language design entries.
Lattice Diamond: Why do i encounter an "Unsupported I/O TYPE Error" for LVDS25E on my Design when ranning MAP?  do i resolve  error?
Description: The user is utilizing the LVDS25E on a BIDIRECTIONAL PORT in their design and is encountering the below error - "ERROR - PIO 'magic_bus_tx_pad/IOBUF' has unsupported I/O TYPE LVDS25." Or "ERROR - PIO 'magic_bus_tx_pad/IOBUF' has ...
1146 - ispLEVER Classic / Installation: What causes the "ERROR: Can not read design entry type from Context" ? <br>
Solution: The ispLEVER error message: "ERROR: Can not read design entry type from Context", is usually due to a permissions error in Windows Vista. Please make sure that you have Administrator privileges when the software is installed. Also make sure ...
<div>Radiant: What type of clocks do the Clock Port column of the I/O Timing Analysis Report refer to?</div>
For I/O timing analysis, the "Clock Port" column/field could refer to the following depending on the destination clock: 1. Internal oscillator clock: If the destination clock is directly from the internal oscillator, or if the destination clock is ...
ispLever Clasic 2.1 and below: How to avoid optimization of unconnected pins in a schematic entry on ispLever Classic?
To avoid optimization on unconnected pins in a schematic entry, click on the input/output symbol output net and edit the net attribute "preserve" or "keep" and set it to Y.

1751 - Schematic Design Entry: How do I add I/O type to a port?

1751 - Schematic Design Entry: How do I add I/O type to a port?

Related Articles

3979 - Does iCEcube2 support schematic design entry?

Lattice Diamond: Why do i encounter an "Unsupported I/O TYPE Error" for LVDS25E on my Design when ranning MAP?&nbsp; do i resolve&nbsp; error?

1146 - ispLEVER Classic / Installation: What causes the "ERROR: Can not read design entry type from Context" ? <br>

<div>Radiant: What type of clocks do the Clock Port column of the I/O Timing Analysis Report refer to?</div>

ispLever Clasic 2.1 and below: How to avoid optimization of unconnected pins in a schematic entry on ispLever Classic?

Lattice Diamond: Why do i encounter an "Unsupported I/O TYPE Error" for LVDS25E on my Design when ranning MAP? do i resolve error?