1699 - CPRI:  Does the LatticeECP3 CPRI demo reference design work in the Lattice Diamond software?

• Related Articles

• 1723 - CPRI:  Can Lattice CPRI IP core (Common Public Radio Interface) support auto-negotiation?  

  Lattice CPRI IP core (Common Public Radio Interface) itself provides the auto-negotiation function. There is a state machine that will automatically go through a searching state from one line rate to the next line rate, eventually it will find the ...

• 7763 - I3C Controller IP - Where can I download the Out of the Box Design Example

  Please refer to below information: I3C IP User Guide : https://www.latticesemi.com/products/designsoftwareandip/intellectualproperty/ipcore/ipcores04/i3c-controller Navigate to the IPUG from the link: Documentation > Quick Reference > User Manual > ...

• 1515 - LatticeECP3: Does Lattice have a demo package integrating the CPRI core with an Ethernet MAC, HDLC framer and processor core?

  Description: No. The current Lattice CPRI IP core demo has the C&M channels connection ports which can be connected to an HDLC framer and Ethernet MAC core. The demo has its own test pattern generator and checker, but it does not include the HDLC ...

• 3752 - 7:1 LVDS Video Interface:  Does Lattice have 7:1 LVDS Video Demo Kit which can be used for developing video-based applications, for example camera link interface?

  The following Lattice demo kits are available for utilizing the 7:1 LVDS Reference Design: - ECP3 Video Protocol Board http://www.latticesemi.com/en/Products/DevelopmentBoardsAndKits/LatticeECP3VideoProtocolBoard.aspx Refer to RD1030, 7:1 LVDS Video ...

• 2069 - LatticeECP3: What is the usage of WB_CTI_I signal in the Lattice PCI Express Scatter Gather DMA Demo design?

  WB_CTI_I is a Wishbone user defined signal for tagging the cycle as a single or burst access. In the Lattice PCI Express Scatter Gather DMA Demo design, the signal is driven by the SGDMA IP (Wishbone master). It is sourced by the EBR module (Wishbone ...