1437 - PAC-Designer: What does error message "Error ID 8: At least one output instruction is required with one write" means?

Solution:

In general, Platform Manager/Power Manager applications drive one or more outputs. If the state machine has no outputs assigned, the compiler will generate the above error message. For successful compilation one or more outputs must be assigned in the Logibuilder Sequencer Instruction.

Related Articles
651 - PAC-Designer: Why does my LogiBuilder design fail to compile?  <strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.
PAC-Designer: PAC-Designer will issue this error message if an output is set to be controlled by I2C and that same output is used in a Boolean equation. The fitter drops the output macrocell from the resource list as I2C is controlling the pin. ...
1853 - PAC Designer: What does the error message “The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem” mean when launching PAC Designer?
This error message typically occurs when a user does not have Microsoft's .NET framework set up correctly for their machine. The necessary components are also provided with PAC-Designer, and can be manually installed by running the file ...
ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?
In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...
2310 - PAC-Designer:  Why does my POWR1014A design fail to compile but not give an error message?
If your Power Manager II design fails to compile and gives no error message it could be due to the use of periods or spaces in the project file name or the path name. Usually the failure message is produced immediately after starting the compile ...
PAC-Designer: Which version of PAC-Designer supports ispClock 5500?
PAC-Designer version 4.8 support ispClock 5520 and 5510. Here is the download link of the installer for Windows: https://www.latticesemi.com/view_document?document_id=21833 Please note that ispClock 5500 is already a discontinued product. ...

1437 - PAC-Designer: What does error message "Error ID 8: At least one output instruction is required with one write" means?

1437 - PAC-Designer: What does error message "Error ID 8: At least one output instruction is required with one write" means?

Related Articles

651 - PAC-Designer: Why does my LogiBuilder design fail to compile?&nbsp;&nbsp;<strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.

1853 - PAC Designer: What does the error message “The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem” mean when launching PAC Designer?

ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

2310 - PAC-Designer:&nbsp; Why does my POWR1014A design fail to compile but not give an error message?

PAC-Designer: Which version of PAC-Designer supports ispClock 5500?

651 - PAC-Designer: Why does my LogiBuilder design fail to compile? <strong>PAC-Designer</strong> fails with: F38009 Invalid Node assignment for signal 'pin assignment'.

2310 - PAC-Designer: Why does my POWR1014A design fail to compile but not give an error message?