1228 - SPI4.2: Does the SPI4.2 interface support Hot-Socketing?

• Related Articles

• 6138 - [ECP5]Can Tri-Rate Serial Digital Interface (SDI) PHY IP also support ECP5 devices?

  Solution: The Tri-Rate Serial Digital Interface (SDI) PHY IP only supports ECP3 devices.

• 4332 - MachXO3: Is DDR2/3 Memory Interface supported?

  MachXO3 devices do not support DDR2/3 memory interface. They do not have DQ/DQs pins that are required for DDR memory interface.

• 1723 - CPRI:  Can Lattice CPRI IP core (Common Public Radio Interface) support auto-negotiation?  

  Lattice CPRI IP core (Common Public Radio Interface) itself provides the auto-negotiation function. There is a state machine that will automatically go through a searching state from one line rate to the next line rate, eventually it will find the ...

• 2102 - LatticeECP3 : Does it support the 1.35V operation mode of the 1.35V DDR3 SDRAM?

  The DDR3L 1.35V devices support both the 1.5V and 1.35V operation modes. LatticeECP3 can support the DDR3L 1.35V devices when both are running in the 1.5V operation mode. This is because LatticeECP3 devices do not have 1.35V IO support. If you run a ...

• 4207 - [iCE40 LP/HX] Does iCE40 supports implementation of 7:1 LVDS display interface?

  Feasibility analysis has not been done on iCE40 hence Lattice recommends to use MachXO2 for the implementation of 7:1 LVDS display interface.