1068 - LatticeXP2: Programming and Configuration: How to configure the MCCLK_FREQ for the LatticeXP2 family in the software?

• Related Articles

• 1142 - ispVM: How to generate a LatticeXP and LatticeXP2 device bit file for EPROM programming?

  Unlike using bitstream file *.bit like LatticeSC or LatticeECP3 family, LatticeXP and LatticeXP2 have JEDEC file output format for programming. When using ispVM to program device through JTAG interface, there is no extra step. But to program a EPROM, ...

• 295 - Lattice Diamond: How do I generate a LatticeXP and LatticeXP2 device bit files for EPROM programming?

  Unlike the SRAM based FPGA families like LatticeECPx and LatticeSC, the programming bitstream file for the Flash based LatticeXP and LatticeXP2 are JEDEC file format. When using ispVM to program the on-chip Flash through the JTAG interface, the JEDEC ...

• 7087 - Radiant Programmer: Does this support remote programming capability?

  Radiant Programmer itself does not have the capability of doing remote programming, it will need a third-party connection to allow remote programming. User can use their server as long as they have the 3rd party hardware component (hub) and software ...

• 5414 - iCEcube2: Why the "Adept USB Programming Software" mentioned in iCEblink40LP1KEvaluationKitUsersGuide.PDF is missing?

  Description: The iCEBlink boards were designed when we supported the bundled iCE programmer. Current versions of iCECube2 do not support iCE programmer. Also with the latest Diamond programmer, USB support for programming the board is not available. ...

• 6206 - iCECube2: What version of software do I need to be able to recompile and program ICE65 family?

  The iCE65 devices are supported by iCEcube2 2012.03 and older versions. NOTE: The ICE65 family is a mature and discontinued device. See PCN#08B-12 - ...